Model RR

YOU MAY ASK:

WHY DO I NEED A FLUX?


Solder flux is the necessary ingredient in any solder operation. First it cleans the metal, then helps the solder flow properly when heated. It can be applied separate from the solder or be a part of the solder, contained in the core of the solder. There are different types of flux, first there is Acid. Acid flux is great, used mostly in commercial operations because it can be dangerous, and any excess flux MUST be completely removed or everything will corrode. The second flux most used is the Rosin flux, used a lot in the electronic business. Rosin flux works OK, but when used on electronics it also should be removed since it leaves behind a very sticky mess. On certain electronic circuits it MUST be removed because the rosin attracts water. And it can cause problems in very high speed electronics. Some type of cleaner must be used to remove the excess rosin from items, which in themselves can be dangerous. The other common type of flux is Organic Water Soluble flux. Organic flux has been around for some time, but not readily available to the general public.



SUPERIOR NO.1260

Aluminum Soldering Flux Gel

High Activity, Chloride-free, Organic-Based

Effective in joining aluminum to aluminum

 and aluminum To most ferrous and non-ferrous

 alloys, including some grades of stainless steel**.

Active 350 - 550 deg. F (177 - 288 deg. C)

Clean up with hot water

 Superior No.1260 is excellent for soldering

LiPoly Cells or Other cells with Aluminum tabs.

Don’t accept a unknown substitute!

Note: Great care must be taken when working

with any type of battery   (Disclaimer)

Use with 91/9 Tin/Zinc Solder for Aluminum

Use with 96/4 Tin/Silver Solder for other metals

 Great for repairing cast RR cars and engine chassis

** For Soldering Stainless Steel, not aluminum, and other difficult

to solder metals, See Superior No.71 or Superior No.78.

We recommend using solid wire solder with this flux,

this will give a stronger and cleaner joint.

CAN ONLY BE SHIPPED TO UNITED STATES

CAN ONLY SHIP VIA UPS GROUND

OR USPS (STANDARD PARCEL, GND)


 Note: No.1260 Contains: Amino ethylethanolamine, Ammonium Fluoborate, Zinc Oxide, and Triethanolamine, and must be handled with care and used with adequate ventilation.


available in: 2, 4, 8 Fluid Ounce bottles

Purchase Here

If you prefer

Superior

No.1261 Liquid

Or

No.1265 Paste

Tips on Using No.1260

91% Tin 9% Zinc

Solder for Aluminum

LEAD FREE

TIP TINNER

Keep your iron working properly

Irritant

Corrosive

Health Hazard

Environmentally Damaging

HAZARDS

See SDS for complete information

They are being used more and more in electronics because they are easy to use and can be cleaned up with just plain water. Supersafe™ is an Organic Flux, easy to use and clean up. Click for more about flux.

Privacy Policy

Guarantee

Disclaimer

Technical Advise

Shipping Information




+

About Us

About Superior Flux

Safety Data & Spec Sheets

What is Flux

Why do I need a Flux

New to Soldering Start

HERE  Soldering Tips

Products:

Superior No.30 Supersafe™

Aluminum Flux

Stainless Flux

Jewelry & Brazing Flux

Solder

RubyFluid   

Tip Tinner       Soder-Wick

Home Pg

Contact Us

Office Hours

E-Mail Us

Customer Comments


Top of Page

Click Pictures for Product Information

HOME

SDS/SPEC SHTS

CONTACT US

~

Page 6 - 91/9 Page 17 - Tip